Its been a long, long road to get to this point but as I write, I’m just about to cut the final blocks for my last two hangings and will be printing them in Horton-in-Ribblesdale Village Hall later in the week. Grassington Festival is a week and half away and I’m up at the barn later today to do some final clearing up. Most importantly, I have also successfully completed my 4-metre collagraph!

I should also mention that I spent a day at ArtisOn Ltd in Masham thanks to the lovely Gaynor and Sue letting me use one of the studios for hemming the five hangings. I am also totally indebted and eternally grateful to Lorraine Garlick and Sheila Smith who gave up their free time to sew 47.5 metres of fabric for me. That is true friendship! I don’t have a sewing machine and I have very little sewing experience so what could have been a total nightmare, was actually pretty straightforward and the results are beautiful.

When I embarked upon this project, I don’t think I fully understood the implications of attempting to print a continuous 75 x 400cm collagraph but I’m glad that I didn’t let all of the set-backs and logistical problems put me off. Working on such a large scale has been challenging but really exciting. First I had to sort my design out so I worked on four pieces of cartridge paper that I divided into 1 inch squares (7 1/2″ x 10″) with the idea that I could then apply a grid to the large pieces of mount board and redraw the design using the sketch as a guide. This did work but the initial drawing took two and half days to do and then each plate took a day to draw out not to mention a day each to cut.

The finished drawing (hard to photograph!).

My idea was that the collagraph would be a close-up study looking through a bit of meadow with a number of different flower species represented. I chose to include eyebright, yellow rattle, birds foot trefoil, bush vetch, red clover, wood crane’s-bill, meadow buttercup, pignut and sweet vernal grass. These are all species that I’m familiar with and that are found in upland meadows here in the Yorkshire Dales. I’m a bit of a stickler for accuracy and detail so each plant needed to be researched and I wanted them to be accurately in scale with each other. Using the grid system to upscale the drawings worked really well and took me back to my college days. I used four full sheets of mount board to make the plates and mainly used cutting, wood glue and gesso to create the collagraph.

I soon realised that printing at that scale, it was best to keep things quite simple but it was still a bit of a challenge to work out how to do the veins on the leaves and pignut is a such a delicate and frothy plant that it did take a lot of work to get the look just right. In the meantime I had been searching for a place to physically print the work because I needed a press that could accommodate a 75cm wide and metre long collagraph plate. No small task and I actually found myself waking in the night and having panic attacks about not being able to print the plates once I’d made them. I even found myself trying to work out how I could get such large pieces of card over to Sweden as I know Ålgården’s press would have been perfect. Fortunately I found out that Northern Print in Newcastle have a lovely big intaglio press and I made an appointment to have an induction and to print the first plate. It is a 2 1/4 hr journey to get there on a good day (with no traffic & no accidents) and my first visit saw me getting up at 5.30am and hiring a dog walker in order to get there on time and not leave my furry pals crossing their legs all day.

It was an unbelievable relief to discover that when I book to use the large electric press, I have sole access to it for the whole session and so can work slowly and methodically whilst not worrying about anyone else needing the press or having to reset it. I am now a member of the studio and have plans to go back and create more large-scale collagraphs there.

Each plate initially took an hour to ink and forty-five minutes to wipe in order to get a paper proof. I needed to do that for each one so that the plate would ‘settle’ and I could check it was printing exactly as I wanted it to. It meant that I had to book the press for 2 x three-hour sessions in order to print one section of the hanging. I won’t go into the entire process here as it was lengthy and stressful but imagine trying to handle an inky metre-long piece of card and print it onto a pristeen white piece of four metre voile and you’ll get a bit of an idea. I also had issues with the pressure on the first print and lifted a corner of the fabric to discover that the collagraph was pale and ill-defined. Fortunately I was able to lower it again and tighten the press to get a good print from it. After my first visit with the first successful section printed, I returned home triumphant to recount my exploits to my husband who then asked ‘but how are you going to make sure the plates match up and how are you going to get them all the same tone?’ To be honest, I hadn’t considered this but chose not to think about it too much and just to hope that I could work these problems out as I went along.

Inking the plate

Wiping the plate

Printing a plate

Handling it!!

The first one printed

It took another two sessions (with the last one being from 10am to 8pm) to actually complete the design but it is fair to say that I’m really happy with it. Sure, there are a few flaws and I know that I could do it better a second time around (which I may have to if my Swedish contact does want to buy one for the hospital) but it is how I pictured it and I can’t wait to see it in situ.

The first two prints successfully through the press.

One left to print. Here I am rolling up the previous prints to protect them and make it easier to handle.

The final print! All ready to roll up with tissue paper for transportation home.

Now I’m working on two flights of swallows that will be block-printed using screen printing inks designed for fabric and won’t require a press. Mind you, there are plenty of other factors that could go wrong but I’m choosing to ignore those for now too!